Go to homepage
Go to homepage
$0.00*

Filter products

Filters
–

Calibration gases & consumables - ready for immediate use 


Calibrating gas detectors is required per OHSA 1910.146, 1910.120 and 1910.272, as outlined on OHSA’s website under Calibrating and Testing Direct-Reading Portable Gas Monitors. Dräger has solutions for all of your bump test and calibration needs, from manual tests to fully automated systems that charge, bump test and calibrate multiple devices. Dräger’s DrägerSensor technology allows for fast and highly efficient testing that saves time and money by using less gas. 

Find out more

Dr
Calibration Gas HCN, 10ppm in N2
SRM09280

$636.13*
Dr
Calibration Gas O2, 18%vol in N2
SRM08873

$270.67*
Dr
Mixed Calibration Gas CH4, 2%vol / O2, 18%vol in N2
SRM07729

$326.49*
Dr
Calibration Gas NH3, 50ppm in N2
SRM06776

$326.49*
Draeger_MicroTube_Benzol_ppb
MicroTube Benzene (10 Measurements)
SRM16752
Benzene Measurement Range: 1 - 150 ppb

$205.37*
Draeger_MicroTube_1,3-Butadien_ppb
MicroTube 1,3-Butadiene (10 Measurements)
SRM16753
Measurement range 1,3: 25 - 500 ppb

$163.25*
Dr
Mixed Calibration Gas C4H8, 10ppm / C7H8, 10ppm in N2
SRM11981

$479.21*
Dr
Calibration Gas C4H8, 100ppm in Air
SRM08009

$566.62*
Dr
Calibration Gas CO2, 2.5%vol in Air
SRM09284

$326.49*
Dr
Calibration Gas PH3, 0.5ppm in N2
SRM08408

$358.09*
Dr
Calibration Gas H2S, 20ppm in N2
SRM09503

$326.49*
Dr
Mixed Calibration Gas C3H8, 0.9%vol / O2, 18%vol in N2
SRM08360

$326.49*
Dr
Calibration Gas CO, 100ppm in N2
SRM08970

$326.49*
Dr
Calibration Gas C2H4O, 10ppm in N2
SRM12228

$271.73*
Dr
Calibration Gas CO2, 1.5%vol in N2
SRM08024

$326.49*
Dr
Calibration Gas H2S, 15ppm in N2
SRM11227

$326.49*
Dr
Calibration Gas NO2, 5ppm in Air
6810986

$566.62*
Dr
Calibration Gas CO2, 50%vol in N2
5239084

$318.07*
Dr
Calibration Gas CO, 50ppm in Air
6811354

$326.49*
Dr
Calibration Gas H2, 2%vol in Air
SRM07961

$326.49*
Dr
Calibration Gas CO, 100 / O2, 18 / N2, 112
SRM10633

$566.62*
Dr
Calibration Gas Cl2, 5ppm in N2
SRM11224

$326.49*
Dr
Calibration Gas CH4, 50%vol in N2
SRM08541

$566.62*
Dr
Calibration Gas SO2, 2.5ppm in Air
SRM11206

$637.19*

Flexible Test Gas Supply for Accurate Calibration 

Routine bump tests and calibrations are key to keeping gas detectors reliable and safe. Instead of stocking your own test gases year-round, renting offers a more flexible and cost-effective option—ideal for short-term needs, special projects, or temporary work.

For specialized measurements, the Dräger X-act® 7000 paired with Dräger MicroTubes provides a powerful solution:

The Dräger X-act® 7000 system delivers precise, reliable readings of ultra-low concentrations of hazardous substances like formaldehyde, benzene, and other VOCs. With a wide variety of MicroTubes available, and automated analysis through the X-act® 7000, you get fast, accurate results with ease.

 Discover more about the Dräger MicroTubes and the X-act 7000  

Your benefits at a glance: 

  • No storage costs - you rent exactly what you need 
  • Immediately available & tested - for uninterrupted processes 
  • Suitable for Dräger devices and many other systems 
  • Ideal for service assignments, maintenance or temporary projects

Depending on the type of gas and concentration, the shelf life is usually between 12 and 36 months. The exact expiration date is indicated on the label of each bottle.
Test gas containers should always be stored in a dry, well-ventilated area, away from direct sunlight or heat sources. Ideally, it should be stored at room temperature, unless otherwise specified on the container. It is essential to observe the storage instructions on the label and the safety data sheets for the respective gas.
The frequency of checking or calibrating a gas detector with test gas depends on the type of device, area of use, applicable regulations, and the manufacturer's recommendations. Dräger generally recommends testing portable gas detectors before each use (“bump test”). Calibration should be performed at least every 6 to 12 months or according to the manufacturer's instructions. Details can be found in the operating instructions for your respective measuring device.
The measurement with Dräger MicroTubes in the Dräger X-act 7000 is simple and precise: After inserting the appropriate MicroTube, the X-act 7000 automatically recognizes the type and starts the measurement process. The selective MicroTubes help enable a quantitative analysis of gases and vapors in the air. The system offers high measurement accuracy and is ideal for workplace monitoring and exposure measurement.