Skip to main content Skip to search Skip to main navigation

Key Features and Benefits of the X-am 8000 Set

The Dräger X-am 8000 Ex, O2, CO LC, H2S LC is a multi-gas detector for personal protection against gas hazards. It precisely measures combustible gases and vapors, oxygen, carbon monoxide, and hydrogen sulfide. The detector is equipped with a catalytic Ex sensor and three XXS electrochemical sensors, has a compact, robust housing with IP68 protection, and can be operated in pump or diffusion mode. The device is supplied with a battery and charging technology.

Further information about the product can be found on our website.

Device type:
X-am 8000
Rental Advanced:
Yes
Rental item or Consumable?:
Rental items
Sensors:
CO, Ex (UEG z.B. CH4), H2S, O2

Included in the delivery

All items pictured below are provided with this order. Some components (e.g. sensors) can also be rented if needed.

Dräger X-am 8000

Main Product

Dräger Inductive Supply Unit

Dräger Inductive Supply Unit

Plug-in Power Supply 12V/500MA for 1 X-am 2/5/8000

Plug-in Power Supply 12V/500MA for 1 X-am 2/5/8000

DrägerSensors CatEx 125 PR, XXS CO LC, XXS O2, XXS H2S LC

DrägerSensors CatEx 125 PR, XXS CO LC, XXS O2, XXS H2S LC

Choosing the Right Rental Product for Your Application

Selecting the ideal rental device helps ensure you get the best protection and efficiency for your specific work environment. Consider the types of hazards present, the number of gases to be monitored, and how frequently you’ll need the equipment. Our range of rental products offers flexible solutions - whether you require short-term coverage for a one-off project or long-term use on complex sites. Expert consultation and tailored support are available to help you find the right match for your application.

Key Advantages of the X-am 8000 multi-gas detector

  • Detects 1 to 7 gases, including toxic and flammable gases as well as oxygen, in pump or diffusion mode
  • Combines CAT, IR, PID, and electrochemical (EC) sensor technologies
  • Supports personal air monitoring, confined space entry, and area monitoring
  • Internal pump supports measurements with probes and hoses
  • Pump adapter enables switching between diffusion and pump mode
  • Clear signaling with device, sensor, and alarm indicators
  • Large display shows measurement values and device status
  • Rechargeable lithium-ion battery with an operating time of more than 24 hours
  • IP68 protection against dust and water

Application Areas for Portable Gas Detection

Portable gas detection instruments are subject to very diverse requirements. Different application areas require solutions tailored to the measurement task, which also take into account the respective ambient conditions.
It is generally possible to distinguish between the following application areas:

Personal monitoring

Keine unvorhergesehenen Kosten

These devices are designed to warn the wearer about gas risks in the immediate vicinity. For this reason, they are usually worn on work clothing. The basic requirements that these units therefore have to fulfill are wearing comfort, durability, and reliability. Continuously measuring single-gas and multi-gas instruments are suitable for this kind of work.

Area monitoring

Keine unvorhergesehenen Kosten

In contrast to the personal gas detector area monitors will be placed at central or critical locations to monitor workspaces optimally and independently from persons. For this, the basic requirements are robustness, stability and excellent alarm awareness (optical and acoustic) as well as a longest possible battery runtime. Increased security level can be achieved by connecting the area monitors to wireless alarm chains and by transferring the measurement values from instrument to instrument as well as to mobile terminals.

Confined space entry

Keine unvorhergesehenen Kosten

Maintenance and repair work often require people to climb into confined spaces. These areas of work can be especially dangerous because of the lack of space, the lack of ventilation, and the presense or development of hazardous substances. A clearance measurement is required before entry. Multi-gas instruments are used together with corresponding pumps and accessories such as hoses and probes. After a successful measurement where no hazards have been found, the same instruments can be used for continuous personal monitoring while working in the confined space.

Leak detection

Keine unvorhergesehenen Kosten

Leakages can occur wherever gases or liquids are stored or transported. It is important to identify leakages quickly so that the appropriate measures can be taken to avert harm to people, the environment, and the facility. Detection devices combined with corresponding pumps must be able to respond quickly so as to detect small changes in concentration. High levels of reliability are another minimum requirement for these measuring instruments.

Calibration and Bump Testing Functionality tests

Required function tests before each use are performed using the Dräger test and calibration stations along with the corresponding test gases.
If you wish for a customized alarm threshold configuration and/or an adjustment of the Ex sensor, please specify the alarm thresholds and the target gas calibration at the end of the ordering process in the comment field.

You can also rent bump test equipment for temporary assignments, projects or additional testing tasks. Click here to see our range of products.

Hand touching a black device tester with two gas detectors on a charging station

Associated Rental Items

Discover related equipment and accessories that complement this gas monitor or offer similar functions, helping you find the right tools for your specific safety needs.

Skip product gallery
Black calibration station for gas detectors with display and inserted measurement device on white background
X-dock Set 5300 for X-am 8000 Series
SRM11940_US

From $32.82* per Day
Black calibration adapter for gas detector with Dräger and CAL markings
Calibration Adapter for X-am 8000
SRM11899_US

From $0.58* per Day
Dräger X-am 8000 KIT25 gas detector with display, charger and multiple plug adapters on white background
Multi-gas Detector X-am 8000 with Charging Technology
KIT25_US

From $31.21* per Day
Black USB extension cable with USB-A plug and small black housing with USB port
Communication Module X-am 8000 (USB-DIRA)
KIT56_US

From $2.56* per Day
Black charging module with docking station and power adapter for Dräger X-am 8000 multi-gas detector on white background
Inductive Power Supply Unit X-am 8000
SRM11897_US

From $1.72* per Day
Close-up of a red cylindrical electronic sensor with metal rings and printed codes and serial numbers
DrägerSensor CatEx 125 PR (Poison Resistant)
SRM04311_US

From $2.30* per Day
Round Dräger H2S-LC sensor with yellow label showing ARFK-6636 6811525
DrägerSensor for Hydrogen Sulfide Low Conc. (H2S) XXS
SRM04323_US

From $1.96* per Day

Interested in learning more about the rental process, or ready to equip your next project with trusted Dräger technology?

Our team is here to answer your questions, recommend the best solutions, and help make renting safety equipment simple and stress-free.
Reach out today - we’re happy to help you get started.