Dräger MicroTubes Acetic Acid 2-50 ppm
8610330_UK
£120.13*
MicroTubes for acetic acid measurement with the X-act 7000v
Dräger MicroTubes for acetic acid (CH₃COOH) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 2 to 50 ppm. Its pungent vapour irritates the eyes and respiratory tract long before it reaches hazardous levels.
- Measuring range 2 to 50 ppm – matched to the concentrations that matter when you assess acetic acid exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Acetic acid (CH₃COOH)
Technical data of these MicroTubes
- Measuring range: 2 to 50 ppm
- Measurement time: 20 to 170 s
- Standard deviation: ±25 %
- Permissible ambient temperature: 0 to 30 °C
- Permissible humidity: 5 to 20 mg/L
Typical applications for these MicroTubes
- Food processing, silage and animal feed plants, chemical production and printing works.
Instrument compatible with these MicroTubes
- Dräger X-act 7000