Dräger MicroTubes Acetone 25-5,000 ppm
8610470_UK
£107.37*
MicroTubes for acetone measurement with the X-act 7000
Dräger MicroTubes for acetone (C₃H₆O) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 25 to 5,000 ppm. It is highly flammable and readily builds up in poorly ventilated areas.
- Measuring range 25 to 5,000 ppm – matched to the concentrations that matter when you assess acetone exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Acetone (C₃H₆O)
Technical data of these MicroTubes
- Measuring range: 25 to 5000 ppm
- Measurement time: 20 to 500 s
- Standard deviation: ± 25 %
- Permissible ambient temperature: 0 to 30 °C
- Permissible humidity: 1 to 30 mg/L
Typical applications for these MicroTubes
- Paint and coatings plants, laboratories, adhesive production and cleaning bays.
Instrument compatible with these MicroTubes
- Dräger X-act 7000