Dräger MicroTubes Ammonia 100-2,500 ppm
8610020_UK
£185.85*
MicroTubes for ammonia measurement, 100 to 2,500 ppm range
Dräger MicroTubes for ammonia (NH₃) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 100 to 2,500 ppm. The upper range is needed to quantify a leak, not merely to detect it.
- Measuring range 100 to 2,500 ppm – matched to the concentrations that matter when you assess ammonia exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Ammonia (NH₃)
Technical data of these MicroTubes
- Measuring range: 100 to 2500 ppm
- Measurement time: approx. 3 to 45 s
- Standard deviation: ± 20 %
- Permissible ambient temperature: 0 to 40 °C
- Permissible humidity: 1 to 40 mg/L
Typical applications for these MicroTubes
- Industrial refrigeration plant, fertiliser production and large-scale livestock housing.
Instrument compatible with these MicroTubes
- Dräger X-act 7000