Dräger MicroTubes Benzene 10-100 ppm
8610280_UK
£101.47*
MicroTubes for benzene measurement, 10 to 100 ppm range
Dräger MicroTubes for benzene (C₆H₆) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 10 to 100 ppm. The higher range covers vessel entry and spill response, where concentrations rise sharply.
- Measuring range 10 to 100 ppm – matched to the concentrations that matter when you assess benzene exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Benzene (C₆H₆)
Technical data of these MicroTubes
- Measuring range: 10 to 100 ppm
- Measurement time: 10 to 75 s
- Standard deviation: ± 20 %
- Permissible ambient temperature: 0 to 35 °C
- Permissible humidity: 1 to 30 mg/L
Typical applications for these MicroTubes
- Refinery maintenance, tank cleaning and confined space entry.
Instrument compatible with these MicroTubes
- Dräger X-act 7000