Dräger MicroTubes Carbon Monoxide 2-1,000 ppm
8610080_UK
£107.55*
MicroTubes for carbon monoxide measurement with the X-act 7000
Dräger MicroTubes for carbon monoxide (CO) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 2 to 1,000 ppm. CO is colourless, odourless and acutely toxic, so it cannot be detected by the senses.
- Measuring range 2 to 1,000 ppm – matched to the concentrations that matter when you assess carbon monoxide exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Carbon monoxide (CO)
Technical data of these MicroTubes
- Measuring range: 2 to 1,000 ppm
- Measurement time: approx. 5 to 300 s
- Standard deviation: ± 25 %
- Permissible ambient temperature: 10 to 40 °C
- Permissible humidity: 1 to 40 mg/L
Typical applications for these MicroTubes
- Boiler houses, foundries, car parks, tunnels and confined space entry.
Instrument compatible with these MicroTubes
- Dräger X-act 7000