Dräger MicroTubes Chlorine 50-5,000 ppb
8610010_UK
£134.57*
MicroTubes for chlorine measurement with the X-act 7000
Dräger MicroTubes for chlorine (Cl₂) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 50 to 5,000 ppb. Chlorine is a severe respiratory irritant and the ppb range covers the exposure limit.
- Measuring range 50 to 5,000 ppb – matched to the concentrations that matter when you assess chlorine exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Chlorine (Cl₂)
Technical data of these MicroTubes
- Measuring range: 50 to 5000 ppb
- Measurement time: 10 to 400 s
- Standard deviation: ± 25 %
- Permissible ambient temperature: 0 to 40 °C
- Permissible humidity: 1 to 20 mg/L
Typical applications for these MicroTubes
- Water and waste-water treatment, swimming pools, pulp bleaching and chemical plants.
Instrument compatible with these MicroTubes
- Dräger X-act 7000