Dräger MicroTubes Ethylene Oxide 0.25-10 ppm
8610580_UK
£187.25*
MicroTubes for ethylene oxide measurement, 0.25 to 10 ppm
Dräger MicroTubes for ethylene oxide (C₂H₄O) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 0.25 to 10 ppm. The ppm range is used for leak testing and for clearance checks after a sterilisation cycle.
- Measuring range 0.25 to 10 ppm – matched to the concentrations that matter when you assess ethylene oxide exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Ethylene oxide (C₂H₄O)
Typical applications for these MicroTubes
- Sterilisation facilities, cylinder stores and chemical production.
Instrument compatible with these MicroTubes
- Dräger X-act 7000