Dräger MicroTubes Formaldehyde 0.15-3 ppm
8610100_UK
£96.10*
MicroTubes for formaldehyde measurement, 0.15 to 3 ppm range
Dräger MicroTubes for formaldehyde (CH₂O) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 0.15 to 3 ppm. Monitoring close to the exposure limit is required wherever resins cure or disinfectants are used.
- Measuring range 0.15 to 3 ppm – matched to the concentrations that matter when you assess formaldehyde exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Formaldehyde (CH₂O)
Typical applications for these MicroTubes
- Wood-based panel plants, laboratories, furniture production and fumigation work.
Instrument compatible with these MicroTubes
- Dräger X-act 7000