Dräger MicroTubes Formaldehyde 5-150 ppb
8610540_UK
£190.10*
MicroTubes for formaldehyde measurement, 5 to 150 ppb range
Dräger MicroTubes for formaldehyde (CH₂O) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 5 to 150 ppb. Formaldehyde is carcinogenic and irritating at concentrations well below one ppm.
- Measuring range 5 to 150 ppb – matched to the concentrations that matter when you assess formaldehyde exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Formaldehyde (CH₂O)
Technical data of these MicroTubes
- Measuring range: 5 to 150 ppb
- Measurement time: approx. 360 to 960 s
- Standard deviation: ± 25 %
- Permissible ambient temperature: 15 to 35 °C
- Permissible humidity: 4 to 18 mg/L
Typical applications for these MicroTubes
- Pathology and histology laboratories, chipboard and textile production and disinfection work.
Instrument compatible with these MicroTubes
- Dräger X-act 7000