Dräger MicroTubes Hydrogen Sulphide 0.1-50 ppm
8610050_UK
£115.28*
MicroTubes for hydrogen sulphide measurement, 0.1 to 50 ppm
Dräger MicroTubes for hydrogen sulphide (H₂S) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 0.1 to 50 ppm. H₂S paralyses the sense of smell at higher concentrations, removing the only natural warning.
- Measuring range 0.1 to 50 ppm – matched to the concentrations that matter when you assess hydrogen sulphide exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Hydrogen sulphide (H₂S)
Typical applications for these MicroTubes
- Sewers and waste-water plants, oil and gas production, tanneries and biogas plants.
Instrument compatible with these MicroTubes
- Dräger X-act 7000