Dräger MicroTubes MTBE 2-200 ppm
8610530_UK
£121.16*
MicroTubes for MTBE measurement with the Dräger X-act 7000
Dräger MicroTubes for MTBE (methyl tert-butyl ether) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 2 to 200 ppm. MTBE taints water at minute concentrations and marks fuel losses to ground.
- Measuring range 2 to 200 ppm – matched to the concentrations that matter when you assess MTBE exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- MTBE (methyl tert-butyl ether)
Technical data of these MicroTubes
- Measuring range: 2 to 200 ppm
- Measurement time: 60 to 450 s
- Standard deviation: ± 25 %
- Permissible ambient temperature: 10 to 30 °C
- Permissible humidity: 1 to 30 mg/L
Typical applications for these MicroTubes
- Petrol blending, tank farms, forecourts and groundwater remediation.
Instrument compatible with these MicroTubes
- Dräger X-act 7000