Dräger MicroTubes Methylene Chloride 10-500 ppm
8610510_UK
£136.04*
MicroTubes for methylene chloride measurement with X-act 7000
Dräger MicroTubes for methylene chloride (CH₂Cl₂, dichloromethane) are short-term measurement tubes for the Dräger X-act 7000 analyser, covering 10 to 500 ppm. It is a suspected carcinogen and its heavy vapour collects in pits and tanks.
- Measuring range 10 to 500 ppm – matched to the concentrations that matter when you assess methylene chloride exposure or trace a leak.
- Read out automatically by the X-act 7000 – the analyser evaluates the tube and shows the concentration directly, so there is no colour scale to judge by eye and no operator interpretation to defend afterwards.
- Ready to use straight from the box – no calibration, no warm-up time and no sensor to replace; each tube carries its own batch data for the instrument to read.
- A documented spot measurement in minutes – ideal where a permanently installed monitor would be disproportionate but a defensible reading is still needed.
Measured gas and detection range
- Methylene chloride (CH₂Cl₂, dichloromethane)
Technical data of these MicroTubes
- Measuring range: 10 to 500 ppm
- Measurement time: 180 to 720 s
- Standard deviation: ±25 %
- Permissible ambient temperature: 10 to 40 °C
- Permissible humidity: 1 to 40 mg/L
Typical applications for these MicroTubes
- Paint stripping, degreasing operations, adhesive production and pharmaceutical extraction.
Instrument compatible with these MicroTubes
- Dräger X-act 7000