Dräger Multi Gas Detector external pump including USB power supply and filter UK
£2.78*
Available
The Dräger X-am Pump turns your X-am gas detector into a sampling instrument, enabling clearance measurement of tanks, shafts and other hard-to-reach spaces before entry.
- X-am pump for the Dräger X-am® 2500/2800 and X-am® 5000/5600/5800 gas detectors
- Clearance measurement in confined spaces, vessels, ducts and manholes
- Starts automatically as soon as it is connected to a switched-on X-am instrument – switching between pump and diffusion mode takes seconds
Key features:
- Flow rate 0.4 l/min, sampling distance up to 45 m
- Optimised for 3 mm hoses; adapters available for 5 mm hoses
- Explosion protection approval for Zone 0, IP67 dust and water protection, operation down to −40 °C
- Compact and light: approx. 200 g, extends the instrument by less than 10 cm
- Rechargeable battery via micro-USB with LED charge indicator, up to 20 hours of continuous operation, approx. 6 hours charging time
- Potted battery, resistant to drops and impacts
- Pump runtime, charge state, battery warnings and flow alarm are shown on the X-am and stored in the datalogger, so clearance measurements can be separated from personal monitoring records
Scope of delivery:
- Dräger X-am Pump
- USB power supply
- Carrying strap
The following items must be rented in addition:
- 10 m hose FKM 3 mm, cpl. with adapters
- Float probe, 5 cm hose + connector 5 mm
- Filter set
Carry out the prescribed function tests before every use with Dräger test and calibration stations and the corresponding test gases. Please note that use with the Dräger X-act 7000 requires the separately available Coupler X-act 7000.
| Article type: | Rental Items |
|---|---|
| Device type: | X-am 2500, X-am 5000, X-am 5600, X-am 5800 |
| Rental Advanced: | Yes |
Accessory Items
