Dräger X-plore 8000 Combination Filter A1B1E1K1 Hg P R SL
6739555_UK
£90.49*
X-plore 8000 combination filter A1B1E1K1 Hg P R SL with mercury
Genuine Dräger X-plore 8000 Combination Filter A1B1E1K1 Hg P R SL for the Dräger X-plore 8000 powered air purifying respirator, supplied as a single filter.
- Widest protection in the range – organic vapours above 65 °C (A), inorganic gases (B), acid gases and sulphur dioxide (E), ammonia and its organic derivatives (K), mercury vapour (Hg) and solid and liquid aerosols (P).
- Made for the X-plore 8000 blower – the bayonet fitting locates and seals against the blower unit, so the filter cannot be half-fitted without the user noticing.
- Powered air rather than lung power – the blower draws air through the filter, which is what makes a full shift in a mask bearable and keeps a slight positive pressure inside the facepiece.
- Genuine Dräger filter – certified to EN 12941 / EN 12942 as part of the approved X-plore 8000 system.
Key features of this filter
- Hg – the mercury stage brings a maximum service life of 50 hours under EN 14387, regardless of how lightly the filter has been loaded.
- R – reusable within the limits of the instructions for use; SL – tested against solid and liquid aerosols.
Important safety information
- Powered filtering devices must never be used in oxygen-deficient atmospheres or where the contaminant and its concentration are unknown.
- Only filters of the same type and class may be used together on one blower unit, and they should be replaced as a matched pair.
System compatible with this filter
- Dräger X-plore 8000 powered air purifying respirator, with the X-plore 8500 or X-plore 8700 blower unit and an approved head top or mask