Dräger X-plore 8000 Gas Filter A2
6739580_UK
£62.76*
X-plore 8000 gas filter A2 for organic vapours
Genuine Dräger X-plore 8000 Gas Filter A2 for the Dräger X-plore 8000 powered air purifying respirator, supplied as a single filter.
- Filter type A2 – for organic gases and vapours with a boiling point above 65 °C, the group that covers most solvents, paints and adhesives.
- Made for the X-plore 8000 blower – the bayonet fitting locates and seals against the blower unit, so the filter cannot be half-fitted without the user noticing.
- Powered air rather than lung power – the blower draws air through the filter, which is what makes a full shift in a mask bearable and keeps a slight positive pressure inside the facepiece.
- Genuine Dräger filter – certified to EN 12941 / EN 12942 as part of the approved X-plore 8000 system.
Key features of this filter
- Class 2 – the higher gas absorption capacity of the two common classes, intended for longer or heavier solvent exposure.
- A gas filter alone offers no protection against particles; add a particle filter where dusts or aerosols are also present.
Important safety information
- Powered filtering devices must never be used in oxygen-deficient atmospheres or where the contaminant and its concentration are unknown.
- Only filters of the same type and class may be used together on one blower unit, and they should be replaced as a matched pair.
System compatible with this filter
- Dräger X-plore 8000 powered air purifying respirator, with the X-plore 8500 or X-plore 8700 blower unit and an approved head top or mask