Dräger X-plore 8000 Particle Filter P R SL
6739535_UK
£24.41*
X-plore 8000 particle filter P R SL for dust and aerosols
Genuine Dräger X-plore 8000 Particle Filter P R SL for the Dräger X-plore 8000 powered air purifying respirator, supplied as a single filter.
- Particle filter P R SL – retains solid and liquid aerosols, which covers dusts, fumes, mists and the biological particles encountered in cleaning and demolition work.
- Made for the X-plore 8000 blower – the bayonet fitting locates and seals against the blower unit, so the filter cannot be half-fitted without the user noticing.
- Powered air rather than lung power – the blower draws air through the filter, which is what makes a full shift in a mask bearable and keeps a slight positive pressure inside the facepiece.
- Genuine Dräger filter – certified to EN 12941 / EN 12942 as part of the approved X-plore 8000 system.
Key features of this filter
- R – reusable: the filter may be used for more than one shift within the limits of the instructions for use.
- SL – tested against both solid and liquid aerosols.
Important safety information
- Powered filtering devices must never be used in oxygen-deficient atmospheres or where the contaminant and its concentration are unknown.
- Only filters of the same type and class may be used together on one blower unit, and they should be replaced as a matched pair.
System compatible with this filter
- Dräger X-plore 8000 powered air purifying respirator, with the X-plore 8500 or X-plore 8700 blower unit and an approved head top or mask