Go to homepage
Go to homepage
£0.00*
Skip image gallery
DrägerSensor PID HC UK

DrägerSensor PID HC UK

SRM12102_UK

£0.00*

The DrägerSensor PID HC precisely measures the concentration of hydrocarbons and warns of hazardous gas concentrations.

  • The replaceable sensor is compatible with the Dräger X-am 8000
  • Expected service life of more than 2 years, supplied with a one-year warranty
  • Fast response time: ≤ 5 seconds (t20) and ≤ 10 seconds (t90) in both diffusion and pump mode
  • Warm-up time: ready to measure in 2 minutes, ready for calibration in 2 minutes
  • Operating conditions: −20 to 60 °C, 10 to 95 % RH, 700 to 1,300 hPa

Technical data – DrägerSensor PID HC

Detection limit0.3 ppm isobutylene
Resolution
  • 100 ppb at 0 to 20 ppm
  • 200 ppb at 20 to 50 ppm
  • 500 ppb at 50 to 100 ppm
  • 1 ppm at 100 to 200 ppm
  • 2 ppm at 200 to 500 ppm
  • 5 ppm at 500 to 1,000 ppm
  • 10 ppm at 1,000 to 2,000 ppm
Measuring range0 to 2,000 ppm isobutylene
Response time
  • Diffusion mode: ≤ 5 seconds (t20), ≤ 10 seconds (t90)
  • Pump mode: ≤ 5 seconds (t20), ≤ 10 seconds (t90)
Accuracy (sensitivity)≤ ± 2 % of the measured value at 100 ppm isobutylene; at the zero point ≤ ± 0.3 ppm isobutylene
Warm-up time2 minutes to measurement readiness (warm-up 1), 2 minutes to calibration readiness (warm-up 2)
Environmental conditions
  • Temperature: −20 to 60 °C
  • Humidity: 10 to 95 % RH
  • Pressure: 700 to 1,300 hPa
Effect of temperature
  • Zero point: 0.02 ppm/K
  • Sensitivity: 0.2 ppm/K
Effect of humidity
  • Zero point: ≤ ± 0.05 ppm isobutylene/% RH
  • Sensitivity: ≤ ± 0.15 ppm isobutylene/% RH at 100 ppm isobutylene
Test gasapprox. 100 ppm isobutylene

Special features – DrägerSensor PID HC

The response factors of the library gases are predefined and cannot be changed. For gases not held in the library, user-defined VOC gases can be used.

Gas/vapourMeasuring range
Ammonia (NH3)up to 10,000 ppm
Benzene (C6H6)up to 1,000 ppm
Ethanol (C2H5OH)up to 10,000 ppm
Ethylene (C2H4)up to 10,000 ppm
Toluene (C7H8)up to 1,000 ppm
Xylene (m/p/o-xylene)800 to 1,000 ppm

Further information about this product can be found on our website. Please follow this link.

Main areas of application

  • Chemical industry
  • Painting and varnishing work
  • Storage and use of fuels, e.g. petrol stations

Instructions for use

Further information can be found in the instructions for use: Instructions for use for this product