X-dock 6600 Master Station UK

Gas detector calibration station hire with 6 test gas inlets

The Dräger X-dock 6600 is an automatic test and calibration station with six test gas connections, bump testing and adjusting your gas detectors in under 10 seconds without a PC.

• Test and calibration station with six test gas connections – the version to choose when your fleet needs more than three different test gases available at the same time
• Bump test in under 10 seconds for standard gases, at a reduced flow of 300 ml/min per module to keep test gas costs down
• Standalone operation via the integrated touchscreen, with three configurable test routines – no PC required
• Recognises every sensor combination automatically and tests and adjusts without manual entry
• Expandable to a maximum of 10 modules for X-am and/or Pac instruments, tested in parallel or independently

What the calibration station tests automatically

• Bump test and adjustment of all fitted sensors
• Automatic leak test
• Automatic test of the alarm elements
• Verification of sensor response times

All relevant data is stored and the gas detector logs are read out. With a compatible printer, calibration and test certificates can be printed at the station, supporting T021/T023 (BG RCI) and the related EN standards. All Dräger test gas cylinders are preloaded in the database.

Charging function, seal cassette and 12 V vehicle operation

• Optional charging function for X-am 1/2/5x00 and X-am 3500/8000
• Replaceable seal cassette
• 12 V operation possible, for example in a vehicle
• Single-pump valve concept that minimises wear and switches test gases plus optional compressed air
• Cloud fleet management via Dräger Gas Detection Connect, with local or remote updates by web access

X-dock 6300 or X-dock 6600?

Both stations offer identical test functions and both expand to ten modules. The difference is the number of test gas connections: three on the 6300, six on the 6600. Choose the 6600 if your instruments carry different sensor sets and you want to avoid swapping cylinders between test runs.

The following items must be rented in addition

• Power supply 100–240 V AC / 6.25 A
• One X-dock module per instrument type – see X-dock module X-am 125+, X-am 8000 and Pac