Skip to main content Skip to search Skip to main navigation

The Dräger Multi Gas Monitor 5000 is a portable 5 gas detector for personal protection, monitoring up to five flammable and toxic gases plus oxygen in ambient air simultaneously.

  • Gas detector Dräger X-am® 5000 with exchangeable sensors for 1 to 5 measuring channels
  • Continuous workplace monitoring and clearance measurement before entering confined spaces
  • Suitable for use in explosion-hazard areas, hot work permits and rescue operations

Available sensors and measuring ranges:


Sensor Measuring range Additional information
Ex/LEL 0 to 100 %LEL CatEx 125 PR / PR Gas; methane additionally 0 to 100 vol.%
O2 0 to 25 vol.%, 0 to 30 vol.% or 0 to 100 vol.%
CO 0 to 2,000 ppm CO HC: 0 to 10,000 ppm; H2-compensated version available
H2S 0 to 200 ppm H2S HC: 0 to 1,000 ppm
CO2 0 to 5 vol.%
NO2 0 to 50 ppm
SO2 0 to 100 ppm
NO 0 to 200 ppm
NH3 0 to 300 ppm
Cl2 0 to 20 ppm
PH3 0 to 20 ppm
HCN 0 to 50 ppm
O3 0 to 10 ppm

Additional sensors are available on request.

Key features:

  • Optical alarm, multi-tone audible alarm of approx. 90 dB(A) at 30 cm and vibration alarm
  • IP67 protection, approved for Zone 0, 1 and 2, gas groups IIA, IIB, IIC, temperature class T3 or T4
  • ATEX and IECEx approved
  • Approx. 12 hours of operation with alkaline batteries or the NiMH power pack
  • Compact and light: 130 x 48 x 44 mm, approx. 220 to 250 g

Typical applications:

  • Personal gas monitoring at the workplace
  • Clearance measurement before entering tanks, vessels, shafts and confined spaces
  • Work in explosion-hazard areas and hot work permits
  • Work at height, fire brigade and rescue services

The following items must be rented in addition:

  • Charging module X-am 1/2/5000
  • Power supply single unit X-am 1/2/5/8000

Carry out the prescribed function tests before every use with Dräger test and calibration stations and the corresponding test gases.